Various Settings/Instrument Settings
Avg. Meas.
— Confi gure as necessary —
Sets the number of measurements to perform when averaging measurements.
After setting the number of averaging measurements and pressing the measuring button
that many times, an average value from the obtained data will be displayed as the
measurement.
Memo
If the number of averaging measurements is changed while performing average
measurement, the measured data will be cleared. (Target information will not be
cleared.)
• When "Avg. Meas." is not displayed in the menu, refer to page E-59 and turn
the setting "ON" in the Instrument Menu Customization settings.
1
Go to the <MENU> screen.
MENU/OK
2
Select "Avg. Meas." and confi rm.
MENU/OK
or
3
Select "On" and confi rm.
MENU/OK
or
The average measurement count (** times) will be
displayed.
Instrument Menu Customization
Ver.1.00.0000
MENU
Back
Browse Data
Language
Avg. Meas.
Tol. Judg.
Mask Setting
Auto Off
Preset
Date/Time
USB Connec.
10:00
MENU
Back
Avg M.
Off
On
(Cont.)
4
Move the selection frame to "** times" and
confi rm.
MENU/OK
or
and will be displayed above and below the
measurement count.
5
Confi gure the average measurement count and
confi rm.
MENU/OK
or
Press
to switch the values to ascending order,
and press
to switch to descending order.
6
Go back to the <MENU> screen.
MENU/OK
7
Go back to the <Measurement> screen.
MENU/OK
<Measurement result display example when "Avg. Meas." is confi gured>
Setting
Initial Setting
Setting
Average measurement will
●
Off
not be performed.
The set number of
measurements will be
On
performed, and the average
will be displayed.
Avg M. times
2–10
10:00
MENU
Back
Avg M.
Off
On
display
02
times
05
times
10:00
Avg. Meas. Cnt.
05
Target
display
87.9
L*
-0.6
a*
b *
2.9
10:00
05
05/05
Setting
E*
0.1
L* -0.1
a*
0.0
b*
0.0
29