Srx-101A Light Shield Installation Manual - Konica Minolta SRX-101A Service Manual

16. SRX-101A Light Shield Installation Manual

16-1. Light Shield Kit Contents
Check the contents against this list upon delivery.
Parts Name
ID.No.
1 Foam packing(thickness 10mm)
1A Foam packing(thickness 10mm)
2 Light shield plate
3 Foam packing(thickness 10mm)
3A Foam packing(thickness 10mm)
3B Foam packing(thickness 5mm)
4 Foam packing(square)
5 Foam packing(thickness 3mm)
5A Foam packing(thickness 3mm)
5B Foam packing(thickness 3mm)
6 Light shield plate
7 Foam packing(triangle)
8 Light shield plate
9 Light shield plate
10 Foam packing(thickness 20mm)
10A Foam packing(thickness 20mm)
11 Magnet mounting plate
12 Magnet mounting plate
13 Magnet catcher
14 Foam packing(pentagonal)
15 Magnet mounting plate
16 Switch box
17 Speed nut M4
18 Gromet with membrance
19 Light shield rubber
a Pan-head screw
b Truss-head screw
c Pan-head screw
d Plain washer
e Hexagon nut
SRX-101A LIGHT SHIELD INSTALLATION MANUAL
Qty
9 L=1000mm, cut at adequate length of light shield plate and wall.
1 Cut at L=530mm and use.
1
2 Cut at L=20mm and use.
1 Cut at L=450mm and use.
2 Cut at L=200mm and use.
4
4 Cut at L=165mm and use.
2 Cut at L=225mm and use.
1 Cut at L=560mm and use.
1
2
1
1
1 Cut at adequate length.
2 Cut at adequate length.
1
1
1 Tochigiya, TL-238 No.2.
2
1
1
8
10 Tochigiya, MG-9.
1
M4 x 6
M4 x 8
M6 x 20
φ
6
M6
Remarks
SERVICE MANUAL
89