Troubleshooting - Konica Minolta SRX-101A Service Manual

5-2. TROUBLESHOOTING : FLOW CHARTS
No.
1 Processor will not start up (RUN lamp will not come on)
2 Developer circulation pump not operating.
3 Fixer circulation pump not operating.
4 Drying fans not operating.
5 Electromagnetic valve not operating.
6 Developer supply pimp not operating.
7 Fixer supply pump not operating.
8 Drive motor not operating.
9 Drive motor will not shut off.
10 Developer temperature too low.
11 Developer temperature too high.
12 Drying temperature too low.
13 Drying temperature too high.
14 Supply pumps will not respond to electrical cycle change.
15 Initial or replenish solution supply not operating properly.
16 Supply pumps will not shut OFF.
17 READY light will not come ON.
18 READY light will not turn OFF.
19 Film insertion alarm will not sound.
20 Film insertion alarm will not turn OFF.
21 Processor will not switch over to the Standby Mode.
22 Processor will not switch out of the Standby Mode.
Problem
TROUBLE SHOOTING
Page
23
24
25
26
27
28
29
30
31
32
33
34
35
36
36
36
37
37
38
38
39
39
SERVICE MANUAL
22