I PRECAUTIONS
Before shipment from the factory, the procedure has already been inspected according to local
safety regulations.
However, the following precautions must be taken when servicing this equipment.
a Before servicing, disconnect the automatic processor's power plug from is AC outlet.
If it is absolutely necessary to repair the processor while the power is on, be sure to take
precautions to avoid electrical shock and keep your fingers away from rollers, gears and
other moving parts.
s Use only the types of fuses specified in this manual.
d Use only the replacement parts specified in this manual.
f When unplugging connectors, disconnect them at the socket. Do not pull on the wire bundle.
g When carrying or shipping circuit boards, place them in static-proof bags, or containers
made of conductive material to prevent damage from static electricity.
h Do not touch the wiring patterns, connector contacts or solder on the circuit boards.
j Take care to prevent washers, bolts or other metal objects from failing into the machine and
causing short circuit or damage to gears. etc.
k Remodeling of processor components or systems which is not described in this operation
manual is forbidden.
l After repairs, make sure all parts and wiring have been correctly replaced and reconnected.
I TOOLS AND INSTRUMENT
In addition to your standard service-use tool kit. the following special tools and equipment will
be necessary.
aPush-pull Gauge (Max. 500g)
PRECAUTIONS
SERVICE MANUAL
1