Required Hardware And Software Tools; Unpacking And Inspecting The Equipment - Nortel Digital Telephone IP Adapter Installation And Administration Manual

June 2005

Required hardware and software tools

You need the following tools for hardware and software installation:
antistatic ESD wrist strap (recommended)
Phillips-head screwdriver and two number eight wood screws (if you want
to mount the Digital Telephone External IP Adapter on the wall)
Remote Gateway 9100 Series Product CD-ROM
PC with a CD-ROM drive or an Internet connection for obtaining software,
firmware, and documentation updates
TFTP server application installed on the PC
The TFTP server is required for performing firmware upgrades. If a TFTP
server is currently not installed, you can obtain one from the Internet.

Unpacking and inspecting the equipment

Before you install the Digital Telephone IP Adapter unit, ensure that the
following package contents are all present and are not damaged:
one Digital Telephone Internal IP Adapter or Digital Telephone External IP
Adapter
one power cord and power supply for each Digital Telephone IP Adapter
unit
one six-foot RJ-11 telephone cable for each Digital Telephone External IP
Adapter unit
one installation kit for each Digital Telephone Internal IP Adapter circuit
card. Each installation kit includes the following:
— two ferrite beads
— one overlay
— two mounting screws (used to attach the circuit card to the foot stand)
Remote Gateway 9100 Series and RLC Release Notes (NTP 555-8421-102)
Digital Telephone IP Adapter Quick Start Guide
Digital Telephone IP Adapter Installation and Administration Guide
Installing the Digital Telephone IP Adapter unit
45