Syslog Testing; Performing Syslog Testing - Nortel Digital Telephone IP Adapter Installation And Administration Manual

Troubleshooting

Syslog testing

Once you configure the syslog feature and save it to Flash, use the Syslog test
command to test the configuration. The Remote Gateway 9100 Series system
generates test syslog messages. This allows you to verify the syslog
configuration as well as the syslog collector functionality on the syslog
server(s).
Getting there
911x

Performing syslog testing

To perform syslog testing:
From the Menu Bar, choose Tests → Syslog.
1
Result: A message displays, similar to the following:
2 Click on the OK button.
3 Examine the syslog server(s) to see if the test was successful.
200
→
Configuration Manager
Digital Telephone IP Adapter Installation and Administration Guide
Standard 3.0