Nortel Digital Telephone IP Adapter Installation And Administration Manual page 102

Configuring the IP Adapter unit using the telephone menu
IF you want to
modify the current
RLC settings,
allow unrestricted
access to the
Digital Telephone
IP Adapter unit
and the RLC,
78
THEN do the following:
1 Press 1.
2 Press the Hold key.
Result: The telephone display prompts you to enter
the RLC port number that you want to process this
Digital Telephone IP Adapter unit's traffic. The
telephone display also shows the RLC port number
currently configured to handle this traffic, similar to
the following:
Enter Port # of RLC
7
3 Press the digit(s) of the new port number.
4 Press the Hold key.
Result: The telephone display prompts you to enter
the security level that you want to assign to this
Digital Telephone IP Adapter unit. The telephone
display also shows the current security level, similar
to the following:
Enter Security Level
1
1 Press 1 to select No security.
2 Press the Hold key.
3 Proceed to "Enable IP? [1-Yes 2-No]" on page 79.
Digital Telephone IP Adapter Installation and Administration Guide
Standard 3.0