Using Configuration Manager's Ping; Performing A Configuration Manager Ping - Nortel Digital Telephone IP Adapter Installation And Administration Manual

June 2005

Using Configuration Manager's PING

PING, or Packet InterNet Groper, is a protocol and program to test that a device
is accessible on a network. This section explains how to use the PING option
provided in the Configuration Manager to verify network connectivity. Use this
test as a troubleshooting tool to determine if you can reach the RLC, another
remote unit, or any other device on the network.
Getting there
911x

Performing a Configuration Manager PING

To perform a Configuration Manager PING:
1 From the Menu Bar, choose Tests
Result: The PING Test dialog box displays, similar to the following:
2 Enter the IP Address of the unit you want to PING in the IP Address field.
3 Enter the number of times you want to PING the unit in the Number of
Cycles field (1 to 100).
Digital Telephone IP Adapter Installation and Administration Guide
→
Configuration Manager
→
Ping.
Troubleshooting
197