Connecting The Digital Telephone External Ip Adapter Unit - Nortel Digital Telephone IP Adapter Installation And Administration Manual

June 2005

Connecting the Digital Telephone External IP Adapter unit

Obtain the following cables for your network. These cables are not supplied.
Ethernet cable
If you are connecting the Digital Telephone External IP Adapter unit to a
hub, you need a standard CAT5 unshielded twisted-pair (UTP), straight-
through Ethernet cable. Ensure that this cable is no longer than 100 meters
(325 feet) in length.
Note: Place digital telephones no farther than 1230.7 meters (4000 feet) from
the Digital Telephone External IP Adapter unit.
The following diagram shows the connections on the back panel of the Digital
Telephone External IP Adapter unit.
Digital Telephone External IP Adapter unit
Rear view
connectors
Digital Telephone IP Adapter Installation and Administration Guide
Power Analog Ethernet ADMIN Digital
line
Installing the Digital Telephone IP Adapter unit
phone
G101490IP
55