Procedure 3-5
Using the Recurring Backup option
Use this procedure to add, edit, or clear a currently scheduled recurring backup
of a controller.
Note: You cannot schedule a backup if a backup or restore is in progress.
The state of the controller must be idle to schedule a backup.
Refer to Figure 3-4, The Recurring Backup tab on page 3-16.
Requirements
Before you start, you must
•
be at the Network Wide Backup & Restore window
•
select the Recurring Backup tab
•
have admin privileges
Action
Step
1
2
3
Network Wide Backup & Restore User Guide 450-3101-031 Rel 1.0 Standard June 1999
Administration of Network Wide Backup & Restore 3-13
Action
Determine your action.
If you want to
add a recurring backup
edit a recurring backup
delete a recurring backup
Highlight the controller, in the Controller List, for which you want to edit a
recurring backup.
Go to step 4.
Highlight the controller, in the Controller List, for which you want to delete a
recurring backup.
Click on Clear.
Click on Save.
—continued—
Then go to
step 5
step 2
step 3
NTP Update Issue 1 July 1999
3