3-18 Administration of Network Wide Backup & Restore
Procedure 3-6 (continued)
Using the One Time Backup option
Step
5
6
7
8
9
Integrated Network Management
Action
Determine the date when you want the one time backup to start. Type the one
time backup start date into the Start date: fields.
where
YYYY
MM
DD
Note 1: Do not use a date earlier than today's date.
Note 2: Do not use a date more than 28 days from today.
Determine the time when you want the one time backup to start. Type the one
time backup start time into the Start time: fields.
where
HH
MM
SS
Determine the transfer rate of the backup in bytes per second. In the OPC
pacing speed: field, select among
•
Maximum
•
10 000
•
50 000
•
100 000
•
1000 000
Determine where you want the backups stored. In the Storage location:
field, type in a storage location or click on Browse... and select a location
from the list supplied.
Determine your next step.
If you
do not want to keep the settings
want to change the settings to the previously
designated defaults
want to make your settings the default settings
—end—
450-3101-031
is the four-digit year
is the two-digit month (01 - 12)
is the two-digit day (01 - 31)
is the two-digit hour (use 24-hour clock: 00 - 23)
is the two-digit minute (00 - 59)
is the two-digit second (00 - 59)
Rel 1.0 Standard June 1999
Then click on
Clear
Set To Defaults
Save As Defaults