Procedure 3-2
Retrieving backup history
Use this procedure to retrieve and view backup history for individual
controllers.
With the History tab, you can do the following to a backup:
•
lock
•
unlock
•
delete
Refer to Figure 3-1, The History tab on page 3-7.
Requirements
Before you start, you must
•
be at the Network Wide Backup & Restore window in Edit mode
•
select a controller from the Controller List
•
select the History tab
Action
Step
1
2
3
4
5
6
Network Wide Backup & Restore User Guide 450-3101-031 Rel 1.0 Standard June 1999
Administration of Network Wide Backup & Restore 3-5
Action
Determine the location of the backed up data.
If the data is in the
Recurring Storage location
Custom Storage location
Click on the Recurring Storage Location: button
The Recurring Storage Location is defined in the Recurring Backup tab.
Go to step 7.
Click on the Custom Storage Location: button
Click on Browse.
Select the directory that contains the backed up data.
Click on OK.
—continued—
Then go to
step 2
step 3
3