Starting The Configuration Wizard; Entering Key Code - Nortel HMS400 Installation And Configuration Manual

Starting the Configuration Wizard

To start the Configuration Wizard, follow these steps:
1.
Double click on this icon
The default password is '000'.
2. To launch the wizard, click on Configuration Wizard menu item at the Voice Module
Administration Menu.
The Key Code screen will appear.

Entering Key Code

Connect the security lock to a free USB port on the HMS 400 Server.
1. The Security lock's Serial Number will appear in its corresponding field as shown above. If it is
not displayed then it may mean that the Security lock has not been programmed or it is faulty.
This field is locked and editing is not allowed.
Note: The diagram below shows the location of the USB ports on the HMS 400 Server's Rear
Panel:
Nortel Hospitality Messaging Server 400
Installation and Configuration Guide
on the desktop to run the configuration module.
April 2006
-69-