Nortel HMS400 Installation And Configuration Manual page 110

6. POLLING_MSG_ENABLE=0 & POLLING_MSG_MINUTE=5
Used only for certain Hotel PMS that requires a polling message in order for it to stay active all
the time. Otherwise, it will go off-line thinking that the link is disconnected
7. CheckBCC=1 (Pabx.ini)
Certain ASCII characters (e.g. 16) when computed as the BCC in a PMS record would cause
the PBX to response with a NAK. This will result in that packet being discarded and thus not
processed by the PBX. Fixed this by devising a way to append special character DLE for every
instance of BCC computed as ASCII control codes (5-32 and 127). This will in effect cause the
receiving end to treat the following special character as valid and thus elicit the proper
response of an ACK. This is effected via the parameter above. The default setting is disabled
(0).
Nortel Hospitality Messaging Server 400
Installation and Configuration Guide
April 2006
-110-