Nortel 1000 Configuration Manual page 35

Field
Search LDAP
Directory by
Dial Prefix
2
3
Description
The attributes to be used during a search. You can select one or more of
the following attributes: Common Name (first and last name), Surname
(last name), and First Name. (See the above note in "LDAP Search Filter"
for information about searching by First Name.)
You can specify a dial prefix with each LDAP directory. When a number
from Telephone Field 1 is dialed, Express Directory will prepend to the
phone number any prefix from the dialing rules specified on the IP
Phone page followed by this directory-specific dial prefix. (This prefix
does not apply to Telephone Fields 2 or 3.)
For example, suppose that you have two directories, A and B. A call to
directory A requires the prefix "5" and a call to directory B requires the
prefix "6". The dialing rule specified on the IP Phone page is "9". Thus,
the number for a call to directory A would be "95number" and the
number for a call to directory B would be "96number".
If the same dial prefix is used for all directories, you can specify it on the
IP Phone page for all directories.
For information on the schedule settings, see
Application Gateway with your Directories," page
Click Submit.
Continue as follows:
If you have completed configuring all directories, go to
•
Dialing Rules," page
To configure another LDAP directory, select the source number from
•
Configure Source and specify the connection and attribute
information for that source.
To configure a directory in CSV format, select the source number from
•
Configure Source and go to
Use Directory Files in CSV Format," page
Chapter 2 LDAP/CSV Directory Configuration
Configuring the Application Gateway to Use LDAP Directories
33.
"Configuring the Application Gateway to
Voice Office Application Suite Configuration Guide
"Synchronizing the
35.
"Adding
30.
27