Adding And Changing Custom Zones - Nortel 1000 Configuration Manual

Adding and Changing Custom Zones

1
2
3
4
When you add a custom zone, you specify each extension that is to be a
member of the zone and specify its paging permissions (Send and Receive,
Send Only, or Receive Only). You can change a custom zone by adding or
deleting its member extensions. The list of available extensions is updated
when the Application Gateway(s) synchronize with the signaling and call
servers to update the IP/DN map.
If an IP phone's license status is changed to Denied in the License Monitor,
the extension is removed from the list of available zones. If an extension is
no longer used, it is not automatically removed from zones, as the system
has no way to determine if the extension is temporarily or permanently
out of use. Use Operation > Voice Office > Paging to remove unneeded
extensions from a zone.
To add a paging zone:
Open the Application Gateway Administration Tool: From a web browser,
enter the URL https://AG_ipAddress:AG_adminPort.
Go to Operation > Voice Office > Paging.
By default, Zone Paging imports zones from LDAP based on the settings
configured on the Operation > Voice Office > Directory page. To use
custom zones only, clear the checkbox for Import Zones from LDAP.
Click Add Zone.
Chapter 4 Zone Paging Configuration
Voice Office Application Suite Configuration Guide
Managing Paging Zones
57