Nortel 1000 Configuration Manual page 17

Enabling Communication between the Phones and Application Gateway
To configure individual phones to communicate with the Application
Gateway:
For IP Phone 2002/2004:
•
Power cycle the phone, wait for "Nortel Networks" to flash, and
a
then press the four keys below the display in order from left to right
(OK - BkSpace - Clear - Cancel).
The phone is now in manual configuration mode.
Press OK until the prompt "Cfg XAS?" displays.
b
XAS is the eXternal Application Server. You will configure the
Application Gateway as the XAS.
Press 1 and then press OK. The next prompt is for the XAS IP
c
address. Enter the IP address of your Application Gateway and
then press OK.
For IP Phone 2007:
•
Tap the Tools Menu icon and then select Network Configuration.
a
Scroll down to the XAS option and enter the IP address of the
b
Application Gateway.
Select the GXAS checkbox and enter a port for communication with
c
the Application Gateway. (This port must match the GXAS port
configured on the Operation > General page of the Application
Gateway Administration Tool.)
If you do not select the GXAS option, the IP Phone 2007 will
Note
operate like the IP Phone 2004.
Tap Apply & Reset.
d
Chapter 1 Voice Office Configuration Requirements
Voice Office Application Suite Configuration Guide
9