Configuring Visual Voicemail - Nortel 1000 Configuration Manual

Chapter 5 Visual Voicemail Configuration

Configuring Visual Voicemail

Configuring Visual Voicemail
1
2
3
4
5
6
64
Voice Office Application Suite Configuration Guide
To configure Visual Voicemail, you must specify the IMAP server IP
address and port. Depending on your Nortel Messaging/Communication
Server configuration, you might also need to specify how a VPIM will be
entered for IP phone users logging into Visual Voicemail.
To enable message forwarding, you must configure additional fields.
To configure Visual Voicemail:
On the switch or router port connected to the Application Gateway, turn
off VLAN. UNISTIM packets will be lost if VLAN is on.
Open the Application Gateway Administration Tool: From a web browser,
enter the URL https://AG_ipAddress:AG_adminPort.
Go to the Operation > Voice Office > Voicemail page.
The Unified Messaging Type defaults to Nortel Messaging.
Specify the IP address and the port of your Unified Messaging IMAP
server.
Specify the IP address and the port of your Unified Messaging SMTP
server.