Configuring Express Directory; Configuring The Application Gateway To Use Ldap Directories - Nortel 1000 Configuration Manual

Configuring Express Directory

Configuring the Application Gateway to Use LDAP
Directories
1
2
The remainder of this chapter describes how to configure directories for
Express Directory as well as other Voice Office applications.
The instructions in this chapter assume that you have completed the
configuration described in Chapter 1,
Requirements."
To configure the Application Gateway to use one or more LDAP
directories, you specify the following information in the Application
Gateway Administration Tool:
The total number of directories (both LDAP and CSV) that you want
•
to use. IP telephone users can access all directories through Express
Directory.
Whether you want to combine the directories for the Express Directory
•
list on the IP telephone. If you keep the directories separate, you will
specify a Directory Title to display as a submenu item under "Express
Directory" in the Voice Office menu.
If you use multiple directory sources, but do not combine them, BCS
and Zone Paging will use only the first directory source defined. If you
combine directory sources, those applications will use all directories.
LDAP server connection information for each directory.
•
You also specify the LDAP attributes to be displayed in Express Directory
and used to control Voice Office operation, as described in
LDAP Attributes for Voice Office Operations," page
To specify LDAP server connection information:
Open the Application Gateway Administration Tool: From a web browser,
enter the URL https://AG_ipAddress:AG_adminPort.
Go to the Operation > Voice Office > Directory page.
Chapter 2 LDAP/CSV Directory Configuration

Configuring the Application Gateway to Use LDAP Directories

"Voice Office Configuration
Voice Office Application Suite Configuration Guide
"Specifying
24.
21