Nortel 1000 Configuration Manual page 20

Chapter 1 Voice Office Configuration Requirements
Specifying a Source for Phone IP-to-DN Mappings
3
4
5
12
Voice Office Application Suite Configuration Guide
Select the source to be used to map extensions (DNs) to IP addresses.
If you selected a call server, complete these fields for the signaling server(s).
For Communication Server release 4.0 and 4.5, you specify just one
signaling server (which automatically obtains information from the other
signaling server). For sites using two signaling servers and
Communication Server release 3, you must specify both signaling servers.
The signaling server IP address and Telnet port.
a.
Typical sites have one signaling server deployed. However, larger
sites might have a primary and secondary signaling server or two
signaling servers that are load balanced.
The customer number (used by the call server if it is configured for
b.
more than one customer). Customer Number defaults to "0".
The credentials for the call server and signaling server.
c.
If you selected CSV, complete these fields: