Connecting The Application Gateway And Broadcast Server - Nortel 1000 Configuration Manual

Chapter 3 Broadcast Server Installation
Installing the Hardware and Software
5

Connecting the Application Gateway and Broadcast Server

1
2
3
4
5
6
7
8
46
Voice Office Application Suite Configuration Guide
Upon completion, the Configuration Wizard will open the Broadcast
Server administration window.
Log in and complete the items listed in the "Outstanding tasks" section on
the Broadcast Server home page. These steps include changing the
administrative password, defining groups and creating users.
To enable the Application Gateway to locate Broadcast Server, you need
to specify the route to Broadcast Server in the Application Gateway
Administration Tool. The Application Gateway communicates with
Broadcast Server server over port 9998.
To specify the Application Gateway route to Broadcast Server:
Make sure that the Application Gateway is running.
From a web browser, connect to the Application Gateway by entering the
URL:
https://ipAddress:adminPort
where:
- ipAddress is the IP address of your Application Gateway
- adminPort is the administration port of your Application Gateway (9001)
If a Security Alert dialog box appears, click Yes.
Click the Operation tab.
The Administration Tool login dialog appears.
Enter your administrative username and password for the Application
Gateway. The default is root/rootadmin.
Go to the Operation > Voice Office > IP Phone page.
Enter the following in the Broadcast Server Base URL field:
http://ipAddress/BCS
That URL is the base URL where Broadcast Server is running.
Click Submit.
The Application Gateway registers with Broadcast Server so that the two
servers can communicate.
.