Dual-Card Configuration; Nortel Integrated Conference Bridge: Service Implementation Fundamentals; Nn43001-558/555-4001-135 01.02 Standard - Nortel 2100 Fundamentals

60 Installation and configuration
Dual-card configuration
The dual-card configuration enables a single conference to occur on two
cards and have up to 62 participants depending on access type. In the
dual-card configuration, one card is the primary card, and the other is the
secondary card. Each card can host single-card conferences of three to 32
participants, or a dual-card conference, which occupies ports on both cards.
Datafill the following tables and command interfaces for dual-card
configuration:
•
•
•
•
•
•
•
Figure 20 "Dual-card conference, 1 conference, 62 ports" (page 61)
provides an example of the datafill for dual-card setup.
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100

Nortel Integrated Conference Bridge: Service Implementation Fundamentals

Copyright © 2007, Nortel Networks
.
Note: There is no need for ICB cards in a dual-card configuration to
reside next to each other in an IPE shelf. Software establishes the audio
connections between the two cards. There is no hardware connection
between the two cards.
table LNINV
table ACDGRP
table ACDSGRP
table ACDRTE (requires a new entry)
table ACDLOGIN
table DNROUTE
table OFRT
Note: If single-number access is being used, DN pairs are not required.
Instead configure two single-number access DNs: one for callers to use
to access simple conferences on the primary card and one for callers to
use to access simple conferences on the secondary card.

NN43001-558/555-4001-135 01.02 Standard

ICB Release 4 20 June 2007