54 Installation and configuration
Table 9 "Sample dialing plan for a 62-port dual-card configuration" (page 54)
shows a sample dialing plan for a 62-port dual-card configuration.
Table 9
Sample dialing plan for a 62-port dual-card configuration
Description of DNs
ACD DN
Pair DNs for
single-card
conferences
TUI DNs
Chairperson DNs
Transfer DN
Link DN
Main DN
Finally, configure each port on the primary and secondary cards as a digital
set. See
Assign CDR data
If charge account is used for CDR billing, then configure the feature Charge
Account for CDR billing. Remember to define Key 9 on all ICB key ports.
See
Table 10
LD 15 - Define the charge account for CDR data
Prompt
Response
REQ
CHG
TYPE
CDR_DATA
CHLN
23
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100
Nortel Integrated Conference Bridge: Service Implementation Fundamentals
Copyright © 2007, Nortel Networks
.
DNs for the
primary card
7000
7001-7018 (NCFW =
7000 in LD 23)
7019 (NCFW = 7000)
7020 (NCFW = 7000)
N/A
N/A
7021 (TRGT = 7000
0)
Note: Because of the number and variety of DNs programmed for the
dual-card setup, Nortel Networks recommends creating a dialing plan
chart similar to
Table 9 "Sample dialing plan for a 62-port dual-card
configuration" (page
primary and secondary card attributes, including the dual-card settings,
in the administration BUI.
Table 7 "LD 11 - Configure ICB ports as digital sets" (page
Table 10 "LD 15 - Define the charge account for CDR data" (page
Description
Change customer data.
CDR data block.
Set the charge account number length to 23.
NN43001-558/555-4001-135 01.02 Standard
ICB Release 4 20 June 2007
DNs for the
secondary card
8000
8001-8018 (NCFW =
8000 in LD 23)
8019 (NCFW = 8000)
8021 (NCFW = 8000)
8022 (NCFW = 8000)
7021 (TRGT = 8000
2)
54). Refer to this chart when configuring the
Configure in...
LD 23
LD 23
LD 23
LD 23
LD 23
LD 23
LD 23
49).
54).