Table of Contents
Advertisement
Procedure 6
Access the ICB remotely using a modem
Step
1
2
3
4
5
6
Procedure 7
Access the ICB remotely using a LAN hub
Step
1
2
3
4
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100
Nortel Integrated Conference Bridge: Service Implementation Fundamentals
Copyright © 2007, Nortel Networks
.
Action
Verify that the Ethernet Adapter card is on the I/O panel as described
in
Procedure 4 "Install the Ethernet Adapter card" (page
Plug the terminal cable DB-9 female connector into the DB-9 male
connector on the Ethernet Adapter card on the I/O panel.
Plug the DB-25 male connector at the other end of the terminal
cable into the DB-25 female connector of a DB-25F/DB-25M
nullmodem adapter. If a female-to-female nullmodem is required,
use a customer-supplied nullmodem.
Plug the DB-25 male connector of the nullmodem adapter
DB-25F/DB-25M into the DB-25 female connector on the modem. If
a female-to-female nullmodem is required, use a customer-supplied
nullmodem.
Plug the modular modem cable RJ11 plug into the RJ11 jack on
the modem.
Plug the other end of the modular modem cable RJ11 plug into the
RJ11 jack on the wall.
Action
Verify that the Ethernet Adapter card is on the I/O panel as described
in
Procedure 4 "Install the Ethernet Adapter card" (page
Plug the modular cable RJ-45 plug into the RJ-45 jack on the
NT5D52AC Ethernet Adapter card.
Plug the RJ-45 plug at the other end of the modular cable into the
Ethernet LAN hub.
Make the remaining Ethernet connections as required using
standard Ethernet connection rules.
Note: For local testing purposes, or direct connection from
the Ethernet port to a PC, use an Ethernet cross-over cable
purchased at a local computer store.
NN43001-558/555-4001-135 01.02 Standard
ICB Release 4 20 June 2007
ICB installation and configuration procedures 69
—End—
66).
66).
Hide quick links:
Advertisement
Table of Contents
