Nortel CS 1000 Series Installation And Commissioning Manual
  1. Manuals
  2. Brands
  3. Nortel Manuals
  4. Server
  5. CS 1000 Series
  6. Installation and commissioning manual

Nortel CS 1000 Series Installation And Commissioning Manual

Isdn basic rate interface
Hide thumbs Also See for CS 1000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Nortel Communication Server 1000
ISDN Basic Rate Interface
Installation and Commissioning
Release: 6.0
Document Revision: 03.01
www.nortel.com
NN43001-318
.

Advertisement

Table of Contents
loading

Related Manuals for Nortel CS 1000 Series

Summary of Contents for Nortel CS 1000 Series

  • Page 1 Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning Release: 6.0 Document Revision: 03.01 www.nortel.com NN43001-318...
  • Page 2 ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are subject to change without notice. Nortel, the Nortel Logo, the Globemark, SL-1, Meridian 1, and Succession are trademarks of Nortel Networks. All other trademarks are the property of their respective owners.

  • Page 3: Table Of Contents

    How to get help Getting help from the Nortel web site 7 Getting help over the telephone from a Nortel Solutions Center 7 Getting help from a specialist by using an Express Routing Code 8 Getting help through a Nortel distributor or reseller 8...
  • Page 4 Packet data transmission 99 Testing an ISDN BRI trunk 102 Removing the test setup 102 Generating traffic reports Contents 103 Introduction 103 Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 5: New In This Release

    December 2007 Standard 02.05. This document is up-issued to support Communication Server Release 5.5. June 2007 Standard 01.02. This document is up-issued to remove the Nortel Networks Confidential statement. May 2007 Standard 01.01. This document is issued to support Communication Server 1000 Release 5.0.
  • Page 6 6 New in this release Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 7: How To Get Help

    How to get help This chapter explains how to get help for Nortel products and services. Getting help from the Nortel web site The best way to get technical support for Nortel products is from the Nortel Technical Support web site: http://www.nortel.com/support This site provides quick access to software, documentation, bulletins, and tools to address issues with Nortel products.

  • Page 8: Getting Help From A Specialist By Using An Express Routing Code

    To access some Nortel Technical Solutions Centers, you can use an Express Routing Code (ERC) to quickly route your call to a specialist in your Nortel product or service. To locate the ERC for your product or service, go to: http://www.nortel.com/erc...

  • Page 9: Introduction

    Introduction This document is a global document. Contact your system supplier or your Nortel representative to verify that the hardware and software described are supported in your area. Note the following: • ISDN Basic Rate Interface (BRI) trunking is not available in North America.

  • Page 10: Applicable Systems

    Note on legacy products and releases This technical document contains information about systems, components, and features that are compatible with Nortel Communication Server 1000 Release 6.0 software. For more information on legacy products and releases, click the Technical Documentation link under Support &...

  • Page 11: Conventions

    • Software Input Output Reference - Maintenance (NN43001-711) Online To access Nortel documentation online, click the Technical Documentation link under Support & Training on the Nortel home page: www.nortel.com CD-ROM To obtain Nortel documentation on CD-ROM, contact your Nortel customer representative.
  • Page 12 12 Introduction Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 13: Preparing For Installation

    ISDN BRI cards as determined in "Engineering guidelines" of ISDN Basic Rate Interface Feature Fundamentals (NN43001-580). Refer to Communication Server 1000M and Meridian Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 14: Unpacking And Inspecting

    Check the equipment received against the shipping documents. Note any shortages and report them to your sales representative. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 15: Installing Isdn Bri Hardware

    Select the card slots where the ISDN BRI cards will be located. Remove the module cover for card installation. Install the Multi-Purpose ISDN Signaling Processors (MISPs). Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 16 ISDN BRI card location SILCs, Supported UILCs, Modules Systems BRSCs MISPs — NT4N41 Large Network Core/Network Module Systems slots 0-7 Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 17 These can be up to eight UILCs combined with any other seven peripheral cards (including SILCs), or up to 15 SILCs. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 18 NT8D35 Network module (Large System) Figure 2 "NT8D37 IPE module (Large System)" (page 19) shows the NT8D37 IPE module. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 19 Figure 3 "NT4N41 Core/Network module (Large System)" (page 19) shows the NT4N41 Core/Network module. Figure 3 NT4N41 Core/Network module (Large System) Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 20 Action Once covers have been removed and card slot locations selected for ISDN BRI cards, install the MISP cards. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 21 Carefully remove the MISP from its card slot, and slowly slide the card from the module. --End-- Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 22 Remove the BRSC, SILC, and UILC Step Action Perform the following steps to remove the BRSC, SILC, and the UILC. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 23 Figure 5 "Connect the ISDN BRI terminals to the Large System" (page shows a typical DSL with ISDN BRI terminals connected to it using modular cables. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 24 One end of the cable plugs into the Input/Output (I/O) panel at the rear of the module, and the other end plugs into the MDF. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 25 Figure 6 "Connect the system to the MDF" (page 26) shows the cable connection between the system and the MDF. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 26 Table 4 "UILC port designation labels at the MDF: NT8D37 IPE module (16-cable configuration)" (page 28). Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 27 Installing ISDN BRI hardware for line applications 27 Table 3 SILC port designations at the MDF: NT8D37 IPE module (16-cable configuration) Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 28 28 Installing ISDN BRI hardware Table 4 UILC port designation labels at the MDF: NT8D37 IPE module (16-cable configuration) Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 29 The Building Cable Plan is developed according to instructions in the "Planning the Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 30 Figure 8 "Cross-connect the UILC port to the office wiring" (page illustrate a cross-connection of an SILC port and an UILC port to the building wiring. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 31 Installing ISDN BRI hardware for line applications 31 Figure 7 Cross-connect the SILC port to the office wiring Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 32 Table 5 "NT8D37 IPE moduleSILC and UILC pair-terminations for connectors A, E, K, R (12-cable configuration)" (page 33) shows pair-terminations for connectors. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 33 4T / 4R 34 / 9 R-BR / BR-R 4Rx + / 4Rx - 35 / 10 R-S / S-R Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 34 1T / 1R 36 / 11 BK-BL / BL-BK 1Rx + / 1Rx - 37 / 12 BK-O / O-BK Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 35 For an SILC S/T interface terminal with an optional auxiliary power source, plug the power source into the wall outlet, then Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 36 For every port there is one loop with only one terminating resistor per loop. Each loop can support a maximum of eight telephones. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 37 Installing ISDN BRI hardware for line applications 37 Figure 9 Connect the ISDN BRI terminal to the S/T interface Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 38: Installing Isdn Bri Hardware For Trunk Applications

    Communication Server 1000M and Meridian 1 Large System Installation and Commissioning (NN43021-310) before performing these procedures. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 39 Rate Interface Feature Fundamentals (NN43001-580). Providing clock referencing on the SILC Complete the following procedure to provide clock referencing on the SILC. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 40 Table 8 ISDN BRI clock reference tables Code Length (feet) NTND70AA Connects IPE back plane to IPE I/O panel. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 41 72 - 79 and secure them to a proper place. --End-- Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 42 - Ref 0A Primary +Ref 1A - Ref 1A Secondary +Ref 0B - Ref 0B Secondary +Ref 1B - Ref 1A Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 43 Figure 12 "Connect the network termination to the U interface and to the S/T interface (in TE mode)" (page 44). Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 44 Connect the network termination to the U interface and to the S/T interface (in TE mode) Card location forms Use the following card location forms when installing SILC/UILC and BRSC cards. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 45 (SILC/UILC or BRSC) number slot number connector ports 0–7 0–7 0–3 4–7 0–7 0–7 0–7 0–3 4–7 0–7 0–7 0–7 Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 46 I/O panel SILC/UILC or BRSC (SILC/UILC or BRSC) number slot number connector ports 0–3 4–7 0–7 0–7 0–7 0–3 4–7 Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 47: Preparing The System

    If the red LED is lit, check that the SILC or UILC is manually disabled or faulty. To enable an SILC or a UILC or to Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 48: Setting Up Isdn Bri Test Terminals And Trunks

    Configure the DSLs to support these ISDN BRI terminals and initialize the terminals as described in the "Initialize ISDN BRI Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 49 “Testing ISDN BRI functions” (page 87). Figure 13 ISDN BRI acceptance testing setup for terminals Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 50 “Testing ISDN BRI functions” (page 87). Figure 14 ISDN BRI acceptance testing setup for trunking - Local Exchange connectivity Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 51 ISDN BRI/PRI/DTI local exchange connections, if available. Figure 15 ISDN BRI acceptance testing setup for trunking - TIE trunk connectivity Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 52 52 Preparing the system Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 53: Configuring Isdn Bri Hardware

    OSI protocol. SILC circuit card NT6D70AA -48V North American S/T interface line card NT6D70BA -40V International S/T interface line card Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 54 ISDN Terminal Adapter provides a connection to an analog telephone and supports circuit-switched or packet data; supports B-channel and D-channel packet data. Any other terminal deemed compatible by Nortel Networks. Terminal adapters Required if connecting non-BRI terminals to the ISDN BRI line interface.
  • Page 55 LOOP and MISP prompts in LD 27" (page 56) for the correct response to the MISP prompt. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 56: Installation Procedures

    (DSL 0 and/or DSL 1). Note 2: A clock controller is required in every cabinet or Media Gateway that contains a digital trunk. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 57 4. Connect the ISDN BRI terminals to the DSL. See Procedure 23 “Connecting the ISDN BRI terminals to the DSL” (page 76). 5. Initialize a Nortel Networks M5317TDX terminal. See Procedure 24 “Initializing a Nortel Networks M5317TDX terminal” (page 79).
  • Page 58 Note: One MISP chassis supports a set of four SILCs or UILCs, or a combination of SILCs and UILCs. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 59 Carefully remove the MISP from its card slot. --End-- Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 60 Insert the SILC or UILC into the selected card slot and lock it in place. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 61 TX pins, as shown in Figure 17 "Jumper plug settings for normal power on the TX and RX leads" (page 62). Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 62 Insert the SILC or UILC into the selected card slot and lock it in place. Observe the behaviors of the LED on the faceplate of the MISP to determine its status: Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 63 Connecting the ISDN BRI terminals (for line applications) For line applications, five procedures are required to connect ISDN BRI terminals to the system: Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 64 Connect the ISDN BRI terminals to the DSL. See Procedure 23 “Connecting the ISDN BRI terminals to the DSL” (page 76). Initialize the terminals. See Procedure 24 “Initializing a Nortel Networks M5317TDX terminal” (page 79). --End-- Figure 19 "Connecting ISDN BRI terminals to the system" (page 65) shows a typical DSL and multiple ISDN BRI terminals connected to the system.
  • Page 65 Figure 20 "Cable connectors in main cabinet" (page 67) Figure 21 "Cable connectors in the expansion cabinet" (page 67) Figure 20 "Cable Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 66 The system supports other cross-connect equipment. Refer to the documentation provided with your cross-connect system for further information. --End-- Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 67 Installation procedures 67 Figure 20 Cable connectors in main cabinet Figure 21 Cable connectors in the expansion cabinet Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 68 68 Configuring ISDN BRI hardware Figure 22 Cable connectors in the second expansion cabinet Figure 23 Back of Media Gateway cable connectors Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 69 To cross-connect SILC and/or UILC ports to the building wiring: Identify the card type (SILC or UILC) at the cross-connect terminal. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 70 RX+ RX- is the receive pair of the S/T interface. The cable pair designated T R is the Tip and Ring of the 2B1Q full-duplex U interface. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 71 RX+ RX- is the receive pair of the S/T interface. The cable pair designated T R is the Tip and Ring of the 2B1Q full-duplex U interface. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 72 72 Configuring ISDN BRI hardware Figure 26 Cross-connecting a SILC port to the office wiring Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 73 Action Plug the end of the SILC DSL to the RJ-45 jack on the terminating resistor (A0378866) resistor. --End-- Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 74 • NUMERIS • ANSI standards Contact your Nortel Networks representative for the latest list of compatible terminals. To connect 1TR6 terminals, an ETSI NET-3 to 1TR6 protocol converter is required. A terminal adapter (the So-Adapter) is specifically designed to interface with the ISDN BRI DSL and the 1TR6 terminals. Its main function is to convert 1TR6 protocol, sent from the 1TR6 terminal into the ETSI NET-3 protocol required for ISDN BRI.
  • Page 75 Tip or Ring Tip or Ring Tip or Ring Not used No connection Not used No connection Not used No connection Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 76 For detailed information about this procedure, refer to the terminal user guide. Repeat step 1 step 4 for each ISDN BRI terminal. --End-- Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 77 Installation procedures 77 Figure 28 Connecting the ISDN BRI terminal to the S/T interface Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 78 Figure 29 Connecting the ISDN network terminator to the U interface Non-BRI terminals The M5000 is Nortel Networks’s Universal Terminal Adapter (UTA). It adapts a non-BRI data terminal or an analog (500/2500-type) telephone to the ISDN BRI protocol. Attach a terminal to the M5000 terminal adapter to initialize it.
  • Page 79 Installation procedures 79 Procedure 24 Initializing a Nortel Networks M5317TDX terminal Step Action The following is an example of the steps to initialize an M5317TDX terminal. Table 19 "M5317TDX terminal error codes" (page 80) lists and describes error codes that can appear during terminal initialization. Additional information is contained in the M5317TDX user guide.
  • Page 80 Connecting the ISDN BRI trunks (for trunking applications) For trunking applications, two procedures are required to connect the ISDN BRI trunks: Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 81 Media Gateway. Terminate the 25-pair cables at the cross-connect terminal. Label the cross-connect terminal for each connector. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 82 Identify the trunk wiring facilities connected at the cross-connect terminal. Cross-connect the pins from the SILC or UILC to the trunk wiring facilities. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 83 This procedure is required since SILC cards are designed for applications in the NT mode. --End-- Figure 30 Cross-connecting an SILC port Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 84 84 Configuring ISDN BRI hardware Figure 31 Cross-connecting a UILC port Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 85 Figure 32 Connecting the ISDN network terminator to the U interface and to the S/T interface (in TE mode) Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 86 86 Configuring ISDN BRI hardware Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 87: Testing Isdn Bri Functions

    ISDN BRI terminals. Testing of an ISDN BRI trunk DSL is also included. The tests are divided into: • voice calls • circuit-switched data calls Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 88: Voice Calls

    BRI terminal and establish an active call connection. Verify that voice transmission is established by talking with the person at the other terminal. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 89 The following test requires that the terminal receiving the second (call waiting) call has multiple DN appearances. Otherwise, this test will fail. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 90 DN specified in LD 15, the display on that ISDN BRI terminal is not updated to indicate a call modification. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 91 TSP for the ISDN BRI terminal DN. See "TSP configuration procedures" in ISDN Basic Rate Interface Feature Fundamentals (NN43001-580). Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 92 • Call Join two separate parties on the terminal • disconnect from the Conference Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 93 Press the RELEASE key to drop from the call. The ISDN BRI user should be disconnected from the Conference; the remaining Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 94 Press the RELEASE key to drop from the call. The ISDN BRI user should be disconnected from the conference; the remaining Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 95 ISDN BRI terminals. Use LD 27 to specify this parameter when configuring the TSP. See "TSP configuration procedures" in ISDN Basic Rate Interface Feature Fundamentals (NN43001-580). Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 96 Call Forward is assigned on the basis of the directory number and call type (that is, the user may have voice calls forwarded, while data calls terminate normally). Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 97 ISDN BRI terminal or a non-ISDN BRI terminal. When the CFU feature is activated, outgoing calls can still be made from the ISDN BRI terminal. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 98: Circuit-Switched Data Calls

    B-channel. The call is set up the same way as a voice call. Dial a call using the ISDN BRI terminal key pad or keyboard, depending on the Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 99: Packet Data Transmission

    Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 100 Release the connection. --End-- Repeat this test on other ISDN BRI packet data terminals as needed. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 101 MPH for local transmission and between a system ISDN BRI terminal and a remote ISDN BRI terminal over the Packet Switched Data Network (PSDN). Release the connection. --End-- Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 102: Testing An Isdn Bri Trunk

    ISDN BRI equipment according to the customer configuration. If the actual customer configuration was used to perform these tests, no changes are needed. Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...

  • Page 103: Generating Traffic Reports

    For example, to verify ISDN BRI traffic generated during acceptance testing, select the network traffic report and the MISP traffic report as follows: INVS 1 11 Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 104 For a detailed description of how to set up and print traffic reports, see "Set up ISDN BRI traffic reports" in ISDN Basic Rate Interface Feature Fundamentals (NN43001-580). Nortel Communication Server 1000 ISDN Basic Rate Interface Installation and Commissioning NN43001-318 03.01 11 May 2009 Copyright © 2003-2009 Nortel Networks...
  • Page 106 OR IMPLIED. The information and/or products described in this document are subject to change without notice. Nortel, the Nortel Logo, the Globemark, SL-1, Meridian 1, and Succession are trademarks of Nortel Networks. All other trademarks are the property of their respective owners.

This manual is also suitable for:

Cs 1000eCs 1000m

Table of Contents