9
ICB installation and configuration procedures
Once the site is prepared for installation and the Meridian system software
is configured, use the steps in
65)
Table 11
ICB installation summary
Step
Description
1
Install a serial Maintenance terminal for preliminary card setup using the following
procedures:
•
Procedure 4 "Install the Ethernet Adapter card" (page 66)
Use one of the following three procedures to connect the serial Maintenance terminal to
the ICB as follows:
•
Procedure 5 "Access the ICB directly" (page 68)
•
Procedure 6 "Access the ICB remotely using a modem" (page 69)
•
Procedure 7 "Access the ICB remotely using a LAN hub" (page 69)
If your system is an CS 1000 or Option 11C, use one of the following three procedures to
connect the serial Maintenance terminal to the ICB as follows:
•
Procedure 8 "Access the ICB directly - Option 11C or CS 1000" (page 70)
•
Procedure 9 "Access the ICB remotely using a modem - Option 11C or CS 1000"
(page 71)
•
Procedure 10 "Access the ICB remotely using a LAN hub - Option 11C or CS 1000"
(page 71)
2
Install the ICB card(s) using the following:
•
Procedure 11 "Install ICB cards" (page 72)
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100
Nortel Integrated Conference Bridge: Service Implementation Fundamentals
Copyright © 2007, Nortel Networks
.
Log into the BUI (defaults: admin and 000000) and select the ICB
Installation Wizard (see
to complete the ICB installation.
NN43001-558/555-4001-135 01.02 Standard
ICB Release 4 20 June 2007
ICB installation and configuration procedures 65
"ICB Installation Wizard" (page
—End—
Table 11 "ICB installation summary" (page
74)").