152 Telephone user interface
Schedule a conference
When using the TUI scheduler, first enter the TUI user ID and password.
If a port is reserved for the TUI, only 31 ports are available for conference
use. After scheduling a conference using the TUI, the BUI can be used to
view, modify, or delete the conference.
The conference defined from the TUI has default attributes. Define the
conference parameters, through the telephone keypad, at the prompts of a
guided voice menu. The ICB plays messages when an error is made.
The ICB sets up the following default attributes:
•
•
•
•
•
To schedule a conference through the TUI, follow the steps in
"Use the TUI to schedule a conference" (page
Procedure 21
Use the TUI to schedule a conference
Step
1
2
3
4
5
6
7
8
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100
Nortel Integrated Conference Bridge: Service Implementation Fundamentals
Copyright © 2007, Nortel Networks
.
Note: There are up to seven minutes to schedule a conference with the
TUI. After seven minutes, the ICB sends a voice message indicating that
the allotted time is over. The ICB then disconnects the call.
entry and exit by name
no custom greeting
no conference expansion
no name for the name of the conference
no name for the name of the chairperson
Action
Dial the TUI DN.
At the prompt, enter your TUI user ID.
At the prompt, enter your password (6 digits).
At the prompt, enter the date and time of the conference (optional).
The default is the current day and time.
At the prompt, enter the duration of the conference.
At the prompt, enter the number of ports required for the conference.
At the prompt, enter the Conferee DN (optional).
If a DN is not entered, the ICB card generates one. The ICB card
determines the Chairperson DN automatically.
At the prompt, enter the password length (optional).
NN43001-558/555-4001-135 01.02 Standard
ICB Release 4 20 June 2007
Procedure 21
152).