Nortel Integrated Conference Bridge: Service Implementation Fundamentals; Nn43001-558/555-4001-135 01.02 Standard - Nortel 2100 Fundamentals

176 Maintenance
To conduct conference OA&M for an ICB card, connect a terminal to the
RS-232 port or the Ethernet connector associated with that ICB card. The
maintenance terminal connects to each ICB card through an IPE module
I/O panel connector or through the Ethernet adapter card.
The Ethernet adapter provides two options:
•
•
For the Ethernet connection option, an IP address assigned to the ICB card
is required to enable access to the ICB through the LAN.
Figure 82 "ICB card in the Intelligent Peripheral Equipment Module" (page
176)
shows each IPE module with one ICB card. Each ICB card connects to
its maintenance terminal through the associated IPE module I/O panel
connector. Use one terminal for all ICB cards by moving the terminal cable
to the I/O panel connector of the card to be accessed.
Figure 82
ICB card in the Intelligent Peripheral Equipment Module
Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100

Nortel Integrated Conference Bridge: Service Implementation Fundamentals

Copyright © 2007, Nortel Networks
.
direct terminal connection or modem connection to DB-9 connector
Ethernet connection, where multiple terminals connected to the Ethernet
can access an ICB card
shows an Meridian system with two IPE modules. This example

NN43001-558/555-4001-135 01.02 Standard

ICB Release 4 20 June 2007