Nortel Agent Greeting NTVQ09BA Installation Manual page 73

STEP10: Remove the PC card from the drive of the VPS card (NTVQ09AB) to be
replaced.
STEP11: Remove the dongle from the socket of the removed VPS card
(NTVQ09AB) to be replaced.
STEP12: Insert the dongle into the socket of the old VPS Server Card
(NTVQ09AB).
STEP13: Insert the PC Card into the "/A:/" drive of the old VPS Server Card
(NTVQ09AB).
STEP14: Insert the old VPS Server Card (NTVQ09AB)into the IPE slot in the
switch vacated by the VPS (NTVQ09AB) card to be replaced.
STEP15: This VPS (NTVQ09AB) card should now boot up as a client to the new
Media Card Server Card (NTVQ09BA).
STEP16: Replacement Complete.
Dual PC Card Configuration
!
Agent Greeting Hardware Installation
Caution
Agent Greeting on Media Card (NTVQ09BA) only uses
Single PC Card configuration.
Therefore, in the case of an existing VPS (NTVQ09AB)
Multicard Group that has Dual PC Card Configuration,
for each VPS card (NTVQ09AB)in the group, the 2 PC
Cards used must be replaced by a single PC Card.
The new PC card must be at least equal in size to the
combined size of the PC cards used on the VPS card
(NTVQ09AB).
Agent Greeting Card
Page 73 of 84
Installation Guide