Table of Contents
Advertisement
STEP13: Insert the VPS Card (NTVQ09AB) into its new slot. It should boot up as
an unassigned card.
STEP14:From the Browser User Interface (BUI) of the new Media Card Server
Card (NTVQ09BA), assign the VPS card (NTVQ09AB) as a client. The VPS card
(NTVQ09AB) should reboot and boot up as a client to the new Media Card Server
Card (NTVQ09BA).
STEP15: Installation Complete.
DUAL PC Card Configuration
!
STEP1: Unnassign all client cards from the VPS Server card (NTVQ09AB). All
client cards will reboot as unassigned cards.
STEP2: From the Browser User Interface (BUI) on the VPS server card
(NTVQ09AB), Perform a PC Card Backup. See "PC Card Flash Memory Backup
and Restore" on page 64.
STEP3: Remove the All VPS Agent Greeting Cards (NTVQ09AB) from the
switch.
STEP4: Remove the dongle from the socket on the VPS Server card (NTVQ09AB).
Agent Greeting Hardware Installation
Caution
Agent Greeting on Media Card (NTVQ09BA) only uses
Single PC Card configuration.
Therefore, in the case of an existing VPS (NTVQ09AB)
Multicard Group that has Dual PC Card Configuration,
for each VPS (NTVQ09AB) card in the group, the 2 PC
Cards used must be replaced by a single PC Card.
The new PC card must be at least equal in size to the
combined size of the PC cards used on the VPS card
(NTVQ09AB).
Agent Greeting Card
Page 69 of 84
Installation Guide
Advertisement
Table of Contents
