Nortel CallPilot Installation Manual page 38

38 Chapter 4 Installing the server and peripheral devices
To install the software feature dongle
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Action
Ensure that there is nothing plugged into USB port 0 on the rear
panel.
If the software feature key is not preinstalled in the dongle, insert
it into the software feature slot on the dongle. Insert the software
feature key with the data contact facing down and away from the
embossed i. See "Installing the. feature key." (page
Figure 1
Dongle without feature key
To eject a software feature key, insert a straightened paper clip into
the side access hole.
a. Push the paper clip in the direction of the software feature key.
Note: In the following figure, label 1 is the data contact, and
label 2 is the ground.
Installing the. feature key.
Nortel CallPilot
1005r Server Hardware Installation
NN44200-308 01.04 Standard
5.0 30 April 2007
38).