Chapter 4 Installing The Server And Peripheral Devices; Installing The Server - Nortel CallPilot Installation Manual

Chapter 4
Installing the server and peripheral
devices
In this chapter
"Installing the server" (page 29)
"Installing a High Availability system" (page 30)
"Inspecting the modem" (page 31)
"Connecting peripherals to the server" (page 31)
"Connecting the server to the ELAN subnet" (page 35)
"Connecting the server to the Nortel server subnet (optional)" (page 36)
"Installing the Nortel software feature dongle" (page 37)

Installing the server

Introduction
Before you install the 1005r server, ensure that the chosen location meets
the requirements identified on the "Site inspection checklist" provided in the
Installation and Configuration Task List (NN44200-306).
To install the server
Place the 1005r server in its chosen location. If you are installing the server
in a rack cabinet, follow the instructions provided with the slide rails.
Copyright © 2007, Nortel Networks
.
WARNING
Do not connect the server to the power yet.
Nortel CallPilot
1005r Server Hardware Installation
NN44200-308 01.04 Standard
5.0 30 April 2007
29