Second Dial Tone - Nortel BCM50 Documentation Update

14
• Local (Subscriber): corresponds to the SIP URI map of e.164/Subscriber.
• Private: corresponds to the SIP URI map of Private/CDP, Private/UDP, or Private/Subscriber depending on the
Private network type choice on the Private Network screen.
Page 132, Figure 38, SIP URI map tab
This is a new screen shot reflecting the new field, Private/Subscriber.
Page 132, Table 29, SIP URI map fields
There is a new entry in the table reflecting the new field, Private/Subscriber.
Attribute
SIP Domain Names
e.164 / National
e.164 / Subscriber
e.164 / Special
e.164 / Unknown
Private / UDP
Private / CDP
Private / Special
Private / Unknown
Private / Subscriber
Unknown / Unknown
Page 274, Second Dial Tone
This is a Change Request fix. The following Note is added at the end of this section.
Note:
NN40020-400
Value Description
national.e164 String to use in phone context to identify numbering plan type
subscriber.e164 String to use in phone context to identify numbering plan type
special.e164 String to use in phone context to identify numbering plan type
unknown.e164 String to use in phone context to identify numbering plan type
UDP String to use in phone context to identify numbering plan type
CDP String to use in phone context to identify numbering plan type
special.private String to use in phone context to identify numbering plan type
unknown.private String to use in phone context to identify numbering plan type
subscriber.private String to use in phone context to identify numbering plan type
unknown String to use in phone context to identify numbering plan type
A second dial tone is not provided if an SDT prefix is entered
as an External Autodial (Feature *1).
BCM50 3.0 Documentation Update