Nortel BCM50 Documentation Update page 12

12
Page 119, H323 Settings
New screen shot of H323 Settings showing Gateway protocol changed to MCDN protocol.
Page 120, Table 23, H323 Settings fields
Gateway protocol changed to MCDN protocol.
MCDN protocol None
SL1
CSE
Page 120, Table 23, H323 Settings fields
The Modify field description was moved to the top of the Configuration section and the description field was
updated.
Configuration
Modify <button>
Also, the Gatekeeper TTL field was described as Read-only.
Gatekeeper TTL (s) Read-only.
NN40020-400
These protocols require a keycode.
SL1: Use this protocol only for BCM50 2.5 systems
CSE: Use this protocol for BCM50 3.0 and later systems.
This protocol supports Meridian 1 IPT.
Otherwise, use None.
Click to modify the parameters.
Note: If you change any field in the Configuration section, all
active H.323 calls are dropped. You must click Modify to
restart the H.323 subsystem.
The actual time used by the gatekeeper for the registration
process.
BCM50 3.0 Documentation Update