To configure up to three saved area codes:
1. Click
Services.
A list of options appears in the display area.
2. Use the up and down arrows (on either the navigation cluster or on
your PC keyboard) to select
Options.
3. Select
Area Code
4. Select
1st
Code,
5. Enter the area code you want to use, or edit the existing area code.
The default for area code setup is: no area code specified.
Name display format
You can set the IP Softphone 2050 to display the name of the incoming
calling party in either of the following formats:
•
first name, last name
•
last name, first name
To set the name display format:
1. Click
Services.
A list of options appears in the display area.
2. Use the up and down arrows (on either the navigation cluster or on
your PC keyboard) to select
format.
3. Select
last name, first name
The default setting for name display format is: first name, last name.
Using Password Administration
You can access Password Administration from the CS 1000 Directory
features list. When the system administrator defines your Station Control
Setting CS1000 Directory user preferences
Telephone Options > Call Log
Setup.
2nd
Code, or
3rd
Telephone Options > Name Display
or
first name, last
Code.
name.
93