Preferred Name Match; Area Code Setup - Nortel Softphone 2050 User Manual

Setting CS1000 Directory user preferences
5. Select either of the following:
— To enable the feature, select
— To disable the feature, select
The default setting for new call indication is: On.

Preferred name match

Use preferred name match to set the way names appear in Call Party
Name Display (CPND). If set to Off, CPND displays according to your
server settings. If set to On, CPND displays according to the matching
name found in your CS 1000 Directory (if a match is found).
To enable or disable preferred name match:
1. Click Services.
A list of options appears in the display area.
2. Use the up and down arrows (on either the navigation cluster or on
your PC keyboard) to select
Options.
3. Select New call
4. Select either of the following:
— To enable the feature, select
— To disable the feature, select
The default setting for preferred name match is: Off.

Area code setup

Use area code setup to organize the display of incoming telephone
numbers. When an incoming call arrives with an area code that matches
one of the three stored area codes, the IP Softphone 2050 reorders the
incoming call number to display the telephone number followed by the
area code (as opposed to the area code followed by the telephone
number).
This reordering also applies to the order of telephone numbers found in
the Callers List.
92
New call indication:
New call indication:
Telephone Options > Call Log
indication.
Pref Name Match:
Pref Name Match:
On.
Off.
On.
Off.