IP Softphone 2050 Settings
Audio
Use the Audio dialog box to adjust the level of buffering between your
audio hardware and the IP Softphone 2050.
Use the Quality slider to increase or decrease the amount of delay.
delay
speeds up buffering, but reduces audio quality.
improves audio quality, but slows down buffering.
Note: If your IP Softphone 2050 audio sounds choppy or broken,
move the slider toward Higher Quality.
Use the Ringer Attenuation slider to increase or decrease the ringer
volume.
Sound Devices
Use the Sound Devices dialog box to select and set the various IP
Softphone sound devices.
The dialog box is separated into two areas:
•
"Headset or handset device" on page 72
•
"Handsfree/Ringing/Paging Device" on page 73
Headset or handset device
When using a headset or handset, use this area to:
•
Select the microphone and speaker
•
Adjust volume
•
Select or clear mute status
The Microphone text box displays the currently selected microphone. To
change the microphone, select the microphone you want to use from the
microphone list.
The Speaker text box displays the currently selected speaker. To change
the speaker, select the speaker you want to use from the speaker list.
72
Less
Higher quality