Restoring Defaults; License Servers - Nortel Softphone 2050 User Manual

Using IP addresses and DNS names
If your communications server does not support DHCP, then you must
assign an IP address or DNS name manually.
To assign a manual IP address or DNS name, you must have the
following information about your communications server:
• IP address or DNS name
• Port number
• Server type
To assign an IP address or DNS name:
1. From the Server
or Secondary.
2. Select IP and enter the IP address, or select
DNS name.
3. From the Type
The default port number shows in the Port text box.
4. If your server port number is different from the default number, enter
the correct number in the
Note: Symposium call center agents must select the
check box.

Restoring defaults

To restore the settings dialog to its default settings, click
Defaults.
Resetting the connection
To reset the server connection while the IP Softphone 2050 is running,
click Reset.

License Servers

Use the License Servers dialog box to add new license servers to the
Server Address list and to specify the order in which they are contacted
list, select the server you want to configure:
list, select your server type.
Port text box.
IP Softphone 2050 Settings
Name and enter the
Symposium
Restore
Primary
69