Key Number Assignments - Nortel 2001 Installation And Operation Manual

Page 54 of 302 Nortel Networks IP Phone 2002
Soft key label display
Information line display

Key number assignments

553-3001-368 Standard 4.00
The soft-key label display area displays a maximum six-character string.
Each soft key includes the soft key label and an icon. When a soft key is in
use, a flashing icon displays at the beginning of the soft key label, and the
label shifts one character to the right. If a feature is enabled, the icon state
turns to on. It remains in the on state until the feature key is pressed again.
This cancels the enabled feature and turns the icon off, returning the soft key
label to its original string.
An IP Phone 2002 has a one-line information display area with the following
information:
• Caller number
• Caller name
• Feature prompt strings
• User-entered digits
• Date and time information (if the telephone is in an idle state)
The information area displays different information, according to the
telephone's call processing state and active features.
The IP Phone 2002 has four soft-labeled, pre-defined keys that are used to
provide up to 10 features. Because they are pre-defined, the user cannot
change the key number assignment.
The Message key is numbered 16. Key numbers 17-31 are the four soft key
labels below the display area. See Figure 4 on
Key numbers 17 - 31 support the features A03, A06, CFW, CHG, CPN, PRK,
PRS, RGA, RNP, SCC, SCU, SSC, SSU and TRN, as listed in Table 7 on
page 55.
February 2005
page 47.