Nortel 2001 Installation And Operation Manual page 101

Manual Cfg
VOICE VLAN ID: 1234
Note: The VOICE VLAN ID is entered as a decimal number. The VOICE
VLAN ID is a 12-bit value between 0 and 4095.
10 Enter a valid value, and press OK.
The IP Phone 2004 is configured with 802.1Q enabled, VOICE VLAN
priority = 6, and the VOICE VLAN ID set to the entered value.
11 After the value is entered, the DATA VLAN configuration option appears
on the display:
Screen prompt
0
1
12 If there is not a Data VLAN present, select 0-No and go to step 14;
otherwise, select 1-Yes to set the DATA VLAN ID:
DATA VLAN ID: 1234
Note: The DATA VLAN ID is entered as an integer. The DATA VLAN ID
is a 12-bit value between 0 and 4095, and should be different from the
VOICE VLAN ID.
13 Enter a valid value, and press OK.
The IP Phone 2004 is configured with 802.1Q enabled, the DATA VLAN
ID is configured to the entered value, and the DATA VLAN priority = 0.
The IP Phone 2004 searches for the connect server. When the
connection is complete, proceed to step 14.
14 Enter the following information provided by your system administrator.
Screen prompt
Password
Node
TN
Nortel Networks IP Phone 2004
Description
Data VLAN is not present
Data VLAN is present
Description
IP Phone Installer Password
You are not prompted to enter the IP Phone
Installer Password if it has not been
configured in your system.
The node ID.
The TN or VTN.
IP Phones Description, Installation, and Operation
Page 101 of 302