Nortel 2001 Installation And Operation Manual page 33

a. If local power is used, plug the AC power transformer into the nearest
power outlet. Ensure the correct AC power transformer is used. The
voltage rating of the transformer must match the wall outlet voltage.
Refer to Table 4 on page 27.
— Connect the transformer to the AC power jack shown in Figure 3
on page
to provide strain relief for a secure power connection.
6 When the Nortel Networks logo appears on the display, immediately
press the four feature keys at the bottom of the display in sequence from
left to right.
7 At the prompt DHCP Yes/No?, select No.
8 Enter the following information provided by your system administrator:
Screen prompt
set IP
net msk
def gw
Nortel Networks IP Phone 2001
32. Be sure to thread the cord around the retaining hook
Description
A valid IP Phone 2001 IP address
A subnet mask
The default Media Gateway for the IP Phone
2001 on the LAN segment to which it is
connected
IP Phones Description, Installation, and Operation
Page 33 of 302