Nortel 2001 Installation And Operation Manual page 70

Page 70 of 302 Nortel Networks IP Phone 2002
553-3001-368 Standard 4.00
11 Enter a valid value, and press OK.
The IP Phone 2002 is configured with 802.1Q enabled, the VOICE
VLAND ID is configured to the entered value, and the VOICE VLAN
priority = 6.
12 After the value is entered, the DATA VLAN configuration option appears
on the display:
Screen prompt
0
1
13 If there is not a Data VLAN present, select 0-No and go to step 16;
otherwise, select 1-Yes to set the DATA VLAN ID:
DATA VLAN ID: 1234
Note: The DATA VLAN ID is entered as an integer. The DATA VLAN ID
is a 12-bit value between 0 and 4095, and should be different from the
VOICE VLAN ID.
14 Enter a valid value, and press OK.
The IP Phone 2002 is configured with 802.1Q enabled, the DATA VLAN
ID is configured to the entered value, and the DATA VLAN priority = 0.
The IP Phone 2002 searches for the connect server. When the
connection is complete, proceed to step 15.
15 Enter the following information provided by your system administrator.
Screen prompt
Password
Node
TN
February 2005
Description
Data VLAN is not present
Data VLAN is present
Description
IP Phone Installer Password
You are not prompted to enter the IP Phone
Installer Password if it has not been
configured in your system.
the node ID
the TN or VTN