Nortel 2001 Installation And Operation Manual page 270

Page 270 of 302
553-3001-368 Standard 4.00
Appendix B: IP Phone diagnostic utilities
Procedure 46
Accessing Diagnostic Tools in Remote mode
1 Select Diagnostic Tools from the Diagnostics submenu.
2 Do one of the following:
• Press the Cancel soft key to return to the Diagnostics submenu.
• Use the Navigation keys to scroll to the DiagnosticTools selection.
3 Press the Select soft key to choose one of the following:
• Ping (see Figure 61 on
• TraceRoute (see Figure 62 on
Ping
The following items are available on the Ping submenu in Remote mode:
• IP Addr
• Nr of Pings
• Ping!
• Last ping
Procedure 47
Entering an IP address
1 Scroll through the Ping submenu to the IP Addr menu item. An IP
address appears if previously entered. Example 47.249.48.20.
2 Press the Select soft key.
3 Use the Navigation keys to scroll to the destination IP address.
— If the destination IP address is in the list, press the Select soft
key to select the IP address. Press the Select soft key again to
return to the Ping submenu.
— If the destination IP address is not in the list, continue scrolling
through the available IP address list until the IP address 0.0.0.0
appears. Press the Select soft key.
Tip: To edit the IP address, use the keypad and the Delete soft key
and the Cancel soft key. Use the * key for dots.
4 Press the Select soft key to save the new IP address or press the Cancel
soft key to return to the Ping submenu.
February 2005
page 283)
page 284)