Nortel 2001 Installation And Operation Manual page 32

Page 32 of 302 Nortel Networks IP Phone 2001
Figure 3
IP Phone 2001 rear view
553-3001-368 Standard 4.00
5 Power the IP Phone 2001 using either the Power over Ethernet or an AC
power transformer (local power).
Timing information
There are only four seconds between plugging in the IP Phone 2001
power transformer and the appearance of the Nortel Networks logo on
the display. When you see the logo, you have one second to respond by
pressing the four feature keys at the bottom of the display in sequence
from left to right. If you miss the one second response time, the
IP Phone 2001 attempts to locate the connect server. Wait until it is
finished, and then begin the power up sequence again.
February 2005
IMPORTANT!