Nortel 2001 Installation And Operation Manual page 69

S1 retry
S2 IP
S2 Port
S2 action
S2 retry
Cfg XAS?
(0-No,1-Yes)
XAS IP:
Note 1: The IP Phone 2002 can support a primary (S1) and secondary
(S2) connect server. If you require IP Phones to register on multiple
nodes, refer to "Enhanced Redundancy for IP Line Nodes" in IP Line:
Description, Installation, and Operation (553-3001-365).
Note 2: If the XAS IP is 00.00.00.00, then pressing the Blue feature key
sends the normal UNIStim message to the TPS. If the XAS IP is any other
value, then pressing the Blue feature key sends the Resume Connection
message to the entered XAS IP.
After the Partial or Full DHCP steps are completed, the VLAN option
appears on the display.
9 Select either 1-Ma or 2-Au to enable 802.1Q from the DHCP Enabled -
VLAN Options menu.
Screen prompt
0-No
1-Ma
2-Au
10 If automatic configuration is required, select 2-Auto and go to step 12;
otherwise,select 1-Man to set the VOICE VLAN ID:
VOICE VLAN ID: 1234
Note: The VOICE VLAN ID is entered as an integer. The VOICE VLAN
ID is a 12-bit value between 0 and 4095.
Nortel Networks IP Phone 2002
the number of times the IP Phone 2002
attempts to connect to the server; enter 10
same as S1 in most cases (see note below)
same as S1
same as S1
same as S1
enter 1 (for yes).
Enter the XAS IP address
Description
802.1Q remains off and initialization continues.
0-No is the default value.
If this is selected, proceed to step 15 to
continue the IP Phone 2002 configuration.
Enter a VLAN ID manually.
Automatically enter a VOICE VLAN ID using
DHCP. DHCP auto discovers the VOICE VLAN
ID.
IP Phones Description, Installation, and Operation
Page 69 of 302