Nortel 2001 Installation And Operation Manual page 35

10 If 802.1Q is not required, select 0-No and go to step 15; otherwise, select
1-Yes to choose the method of VOICE VLAN configuration:
Screen prompt
0-No
1-Yes
11 If automatic configuration is required, select 0-Auto and go to step 13;
otherwise, select 1-Man to set the VOICE VLAN ID:
VOICE VLAN ID: 1234
Note: The VOICE VLAN ID is entered as an integer. The VOICE VLAN
ID is a 12-bit value between 0 and 4095.
12 Enter a valid value, and press OK.
The IP Phone 2001 is configured with 802.1Q enabled, the VOICE
VLAND ID is configured to the entered value, and the VOICE VLAN
priority = 6.
13 After the value is entered, the DATA VLAN configuration option appears
on the display:
Screen prompt
0-No
1-Yes
14 Select 0-No, since DATA VLAN is not supported on the IP Phone 2001.
The IP Phone 2001 searches for the connect server. When the
connection is complete, proceed with step 15.
15 Enter the following information provided by your system administrator:
Screen prompt
Password
Node
TN
Nortel Networks IP Phone 2001
Description
Automatic VLAN configuration
Manual VLAN configuration
Description
Data VLAN is not present
Data VLAN is present
Description
IP Phone Installer Password
You are not prompted to enter the IP Phone
Installer Password if it has not been configured
in your system.
The node ID.
The TN or VTN.
IP Phones Description, Installation, and Operation
Page 35 of 302