Startup Sequence - Nortel 2001 Installation And Operation Manual

Page 40 of 302 Nortel Networks IP Phone 2001

Startup sequence

Table 5
IP Phone 2001 IP parameters (Part 1 of 2)
Parameter
IP Address
Net Mask
553-3001-368 Standard 4.00
The IP Phone 2001 registers with the TPS and, if needed, begins the
firmware download. This takes several minutes. When complete, the
IP Phone 2001 resets.
The current system date and time appear on the top line of the display
when the configuration is complete. Self-labelling keys also appear.
15 Check for dial tone and the correct DN above the display.
16 Secure the telephone footstand to the base of the telephone. Use the
angle adjustment grip on the top back of the telephone to adjust the
position.
17 (Optional) Customize the feature keys as required. For more information,
see IP Phone 2001 User Guide.
When an IP Phone 2001 is connected to the network, it must perform a startup
sequence. The elements of the startup sequence include:
• obtaining the IP parameters
• finding a Media Gateway server
• authenticating the user
See Table 5 for a summary of the IP parameters and how they are obtained.
Note: For all static IP address assignments, your system administrator
provides the network information.
Method of Acquisition
Manually entered or automatically retrieved through
Partial or Full DHCP.
Manually entered or automatically retrieved through
Partial or Full DHCP.
February 2005
End of Procedure