Figure 51 Removing A Nortel Vpn Router 4600 Power Supply - Nortel Contivity 2600 Install Manual

Figure 51 Removing a Nortel VPN Router 4600 power supply

3 Grab the handle and pull the power supply firmly until the device disengages.
Be careful of the sharp sheet-metal edges.
4 Insert the new power supply.
Ensure that you seat the power supply firmly in the power supply socket and
that the power supply is locked in. Ensure that the green power LED on the
front of the power supply is on.
5 Tightly secure the power supply screws with a screwdriver.
6 Replace the front bezel.
Chapter 8 Nortel VPN Router 4600 option installation 139
Nortel VPN Router Installation — Hardware Options
CS460010A