Figure 43 Installing Or Removing An Option Card - Nortel Contivity 2600 Install Manual

Figure 43 Installing or removing an option card

Option card
Motherboard
7 Lower the new option card into the slot, and gently press the connector into
the slot.
Seat the card firmly in the slot. If you do not properly seat the card, it does not
work.
8
Replace the screw that secures the card to the slot
9
Replace the top cover on the chassis
a
Hold the cover at an angle, and slide it onto the chassis.
b Insert the four screws that secure the cover to the chassis, and use a
screwdriver to tighten the screws.
Chapter 7 Nortel VPN Router 2750 option installation 123
Rear of unit
Option card slots
(Figure 40 on page
Nortel VPN Router Installation — Hardware Options
Filler panel screw
CS2600017A
(Figure 43).
117).