Installing Or Replacing Option Cards - Nortel Contivity 2600 Install Manual

44 Chapter 2 Nortel VPN Router 1100 option installation
5 The VPN Router 1100 must be running Version 4.80 or later.
6 The VPN Router 1100 must be running Version 4.80 or later.
7 The VPN Router 1100 must be running Version 4.80 or later.

Installing or replacing option cards

To install a new LAN, WAN, or serial option card:
1
2
3
4
5
6
7
NN46110-317 02.01
Use the Web graphical user interface (GUI) or the command line interface
(CLI) to shut down the gateway.
• Web GUI: Choose Admin > Shutdown. Select the option to power off the
gateway after shutdown.
• CLI: Use the
reload
enter
reload power-off disable-logins "Upgrade hardware"
[for the complete syntax of the
Using the Command Line Interface (NN46110-507)].
Wait for the system to shut down.
Turn off the VPN Router 1100 power.
The power switch and power outlet are on the rear of the VPN Router 1100.
Disconnect the power cord from the power outlet.
Disconnect the cord from the VPN Router 1100.
Warning: Risk of electric shock
Turn off the VPN Router 1100 and unplug it before you attempt to
remove or install an option card.
Remove the cables attached to the ports of the VPN Router 1100.
If there are option cards currently installed, unscrew the two screws on each
bracket.
Caution: Risk of equipment damage
Unscrew the option card brackets before you remove the cover from the
VPN Router 1100 or you can damage the option cards.
command to shut down the system. For example,
command, see Nortel VPN Router
reload